Ofset brush cutter 86″ TAZ Cat 2
Cutting width 71″
$8,100.00
The TAZ hammer brushcutter can be used behind the tractor or offset to the side. It works in all angles from -55 ° (down) to clean ditches up to 90 ° up to cut branches and trees that close the path.
It is the ideal tool for roadside maintenance, for the cottage, the camp, for cutting near or under fences. Requires two pairs of double action hydraulic outlets. Adjustable shoe and a full rear roller to avoid gnawing at dirt on uneven ground.
Works with tall grasses, weeds, annual regrowth, small shrubs and branches. As it is a hammer and not a knife, this decreases regrowth by drying out the rest of the plant on the ground. The crushed material will come out on the ground in small pieces which gives a cleaner finish and less collection to do afterwards.
This model is designed for tractors from 60 to 80 hp with a category 2 attachment.
4 in stock
- Works behind the tractor or deported
- Works horizontally, vertically and at an angle
- Requires 2 hydraulic outlets
- Recommended for tractors from 60 to 80 hp
- Requires category 2 attachment
- 24 hammers 3.5 "wide x 4.281" long
| Cutting width | 49 IN | 63 IN | 71 IN | 86 IN |
| Maximum angle up | 90° | 90° | 90° | 90° |
| Maximum angle down | 55° | 55° | 55° | 55° |
| HP recommended | 25-35 HP | 40-60 HP | 55-70 HP | 60-100 HP |
| Weight | 550 pounds | 720 pounds | 1170 pounds | 1301 pounds |
| Attachment | Cat 1 | Cat 1 | Cat 2 | Cat 2 |
Additional information
| Marque | TAZ |
|---|---|
| Model | -TAZ-DDBCR86HD |
| Color | -Green |
| Warranty | 1 year parts and labor. Wear parts such as, but not limited to hammers, belts are not covered by the warranty. The equipment must be returned to Equipements Abordables inc. at the customer's expense. |
Recent Comments