TAZ 65″ offset brushcutter
55″ cutting width
$5,100.00
The TAZ hammer brushcutter can be used behind the tractor or offset to the side. It works in all angles from -55° (down) to clean ditches up to 90° up to cut branches and trees that close the path.
It is the ideal tool for roadside maintenance, for the cabin, the camp, for cutting near or under fences. Requires two pairs of double action hydraulic outlets. Full rear roller to avoid gnawing on uneven ground.
Works with tall grass, weeds, annual regrowth, small shrub and branches. As it is a hammer and not a knife, this reduces regrowth by drying the remains of the plant on the ground. The crushed material will come out on the ground in small pieces which gives a cleaner finish and less collection to be done afterwards.
This model is designed for 40 to 60 hp tractors with a category 1 attachment.
Available on backorder
- Works behind the tractor or offset
- Works horizontally, vertically and at an angle
- Requires 2 hydraulic outlets
- Recommended for 50 to 70 hp tractors
- Requires a category 2 attachment
- 20 hammers 3.5" wide x 4.281" long
| Cutting width | 49 In | 63 In | 71 In | 86 In |
| Maximum upward angle | 90° | 90° | 90° | 90° |
| Maximum downward angle | 55° | 55° | 55° | 55° |
| Recommanded Hp | 25-35 HP | 40-60 HP | 55-70 HP | 60-100 HP |
| Weight (pound) | 550 | 720 | 1170 | 1301 |
| Attachment | Cat 1 | Cat 1 | Cat 2 | Cat 2 |
Additional information
| Marque | TAZ |
|---|---|
| Model | TAZ-DDBCR65LD |
| Color | -Green |
| Warranty | 1 year parts and labor. Wear parts such as, but not limited to hammers, belts are not covered by warranty. The equipment must be returned to Affordable Equipment inc. at the customer's expense. |
Recent Comments